Pmise CF-01

The CF-01 is a fractional CO2 laser built for professional skin resurfacing and scar revision in clinics and medical aesthetic practices. It emits infrared light at 10600nm and delivers it as a grid of microscopic treatment spots, which lets trained operators treat wrinkles, acne and surgical scars, stretch marks and photo-aged skin while leaving most of the surrounding tissue intact for faster recovery.

Unlike ordinary sealed glass-tube CO2 units, the CF-01 uses an RF-excited metal laser tube. This gives a more stable and uniform beam over a longer service life, which matters for busy treatment rooms that run daily sessions. A single platform covers continuous-wave (CW), UltraPulse and fractional (CPG) output, so one device can support minor cosmetic surgery cutting as well as fractional resurfacing.

It belongs to the Ultrapulse CO2 Fractional Laser (10600nm) line. If you are comparing models, our guide on how to choose a fractional CO2 laser walks through the trade-offs.

The CF-01 works on the principle of selective photothermolysis, the idea that a laser wavelength absorbed strongly by a target tissue can heat that target while sparing what is around it. At 10600nm the target chromophore is water, which is abundant throughout the skin. The scanner delivers the beam as separated microscopic columns rather than one continuous sheet of energy.

Inside each treated spot the energy causes controlled ablation together with a zone of thermal coagulation, forming a micro-channel on the order of a tenth of a millimetre. Because the spots are fractional, healthy tissue sits between them and acts as a bridge that starts the natural wound-healing cascade: an inflammatory phase, a proliferative phase and a remodeling phase. During remodeling the skin lays down new collagen, which is what tightens the surface and gradually improves scars and pigment.

Adjustable pulse width lets the operator match the pulse to the thermal relaxation time of different skin layers, balancing collagen contraction against unwanted heat spread. An adjustable focal spot changes the ablation depth: a larger spot gives shallower peeling, a smaller spot reaches deeper. A coaxial 635nm red aiming beam shows where the invisible infrared laser will land, since 10600nm light cannot be seen by the eye.

The CF-01 suits dermatology clinics, plastic and cosmetic surgery centres, and medical spas that want one CO2 platform for both fractional resurfacing and focused cutting work. It is professional equipment intended for use by trained, licensed operators who screen each patient and set parameters per skin type.

• Fine lines, deep wrinkles and general skin tightening or firming
• Scars, including acne, surgical, traumatic and burn scars, and stretch marks
• Epidermal pigmented lesions such as freckles, age spots and sun spots
• Enlarged pores, rough or photo-aged skin and skin rejuvenation
• Minor cosmetic surgery in CW and UltraPulse modes, for example nevi, small skin tags and warts

For scar-focused workflows and case planning, see our scar treatment solutions.

• RF-excited CO2 tube gives more stable, uniform and consistent output than glass-tube CO2, with a markedly longer working life and lower total cost of ownership over time.
• Three output modes in one system (CW, UltraPulse, fractional CPG) cover resurfacing and light surgical cutting on a single platform.
• Scanner-based fractional delivery keeps spot size and density even, which helps operators avoid the spot overlap that causes extra pain and side effects.
• Adjustable focal spot and pulse width let the operator tune ablation depth and heat to the skin type, lesion and treatment area.
• Air cooling and a door-interlock access point support safer, lower-maintenance operation in a clinic setting.
• Interchangeable handpieces and spot lenses adapt the device to areas such as the orbital region, perioral area and nose wing.

What conditions is the CF-01 used for?

It is used mainly for fractional skin resurfacing: wrinkles, acne and surgical scars, stretch marks, enlarged pores, epidermal pigment and photo-aged skin. In continuous-wave and UltraPulse modes it also handles minor cosmetic-surgery tasks such as removing small skin tags, warts and nevi. A trained clinician should confirm each indication and rule out contraindications first.

Which skin types can be treated?

Fractional CO2 can be applied across a range of skin types, but darker skin carries a higher risk of post-inflammatory pigment change. The adjustable spot size, density and pulse width let the operator lower energy and spacing for higher-risk patients. Assessment, test spots and conservative settings are decided by the treating clinician, not the device.

How many sessions are usually needed?

This depends on the indication, the depth treated and how the patient heals, so we do not quote a fixed number. Resurfacing and scar programs are often staged over several sessions with recovery time in between. The clinician plans the interval and count based on results and skin response.

Do you provide training and warranty?

Yes. Because this is professional equipment, we provide operating guidance and clinical training support, plus warranty terms and after-sales service. Contact our team through the contact page for current warranty coverage, spare parts and installation details for your region.